Application solutions
Start From the Duty Cycle, Not the Product Page
SafeCloud supplies LiFePO4 batteries and energy storage systems to distributors, energy brands, installers, EPC contractors and ODM partners. Each solution below starts from what the application demands — environment, duty cycle, communication and documentation — and works back to the platform.
- Founded 2007 · stock code 839424
- 48,000 m² across two plants in Henan and Anhui
- 8 automated production lines, 30+ aging machines
- Engineering response within one business day
Catalog range
12.8 V / 25.6 V / 51.2 V / 256 V · up to 500 kW–1 MW systems
Choose by application
Five application families
If the project sits across two of these, start with whichever one sets the harder constraint — usually the environment or the certification scope.
Solution / 01
RV, Marine & Off-Grid
Drop-in 12.8 V and 25.6 V packs for installation positions that see dust, spray and vibration.
- IP64 sealed enclosure
- 10-second peak at 2× continuous
- Charge blocked below 0 °C
Solution / 02
Home Energy Storage
51.2 V wall, stack, floor and rack formats with closed-loop CAN and RS485 to hybrid inverters.
- 5.12 – 35 kWh per unit
- Up to 15 in parallel
- Cycle life with stated conditions
Solution / 03
Telecom & Solar Lighting
Outdoor, unattended assets where a service visit costs more than the battery it replaces.
- IP67 sealed packs
- Wide temperature range
- RS485 remote monitoring
Solution / 04
Portable & Emergency Power
Private-label portable power stations, with the transport and certification path mapped first.
- AP / XP / Y series
- Configurable AC / DC / USB output
- Air-freight limits handled up front
Solution / 05
Commercial & Industrial ESS
High-voltage modules and containerised systems quoted against a load profile and a PCS.
- 256 V 76.8 kWh modules
- 500 kW – 1 MW containers
- Peak shaving and valley filling
Choose by buying model
Or start from how you buy
The same platform is supplied three ways. The route you take changes the engineering conversation, the documentation and the commercial terms.
Route / 01
Standard supply
Catalogue platforms with consistent specification and export documentation, for distributors building a stable range.
- Fastest lead time
- Established documentation
- Repeat supply planning
Route / 02
OEM / ODM
A proven platform released under your brand, with options locked before first production and held across batches.
- Branding and enclosure
- BMS and protocol configuration
- Market-specific documentation
Route / 03
Project engineering
Configuration driven by a specific site, load profile and system architecture rather than by a catalogue entry.
- Sized against interval data
- PCS and protocol matching
- AHJ and financier documentation
How to get a useful answer
What to send with an enquiry
A quotation is only as good as the inputs. These are the fields that let an engineer answer properly instead of returning a price list.
- Application and installation position
- Nominal voltage and required capacity or energy
- Continuous and peak current or power
- Inverter or PCS brand and exact model
- Ambient temperature range and cycles per day
- Destination market and certification scope
- Trial quantity and expected annual volume
Tell us the application, not just the part number
Send the duty cycle, environment, communication requirement and target market. An engineer replies within one business day with a configured recommendation.