Off-grid homes and cabins
One enclosure replaces a separate battery, inverter and charge controller, which removes most of the DC wiring and commissioning time.
OEM/ODM LiFePO4 battery manufacturer since 2007
OEM/ODM LiFePO4 battery manufacturer since 2007
All-in-one home energy storage · Battery and 5 kW inverter
Model: AYG10-5KW
The AYG10-5KW combines a 51.2 V 200 Ah LiFePO4 pack with a 5 kW hybrid inverter in one mobile enclosure, so a single unit covers storage, PV charging and AC output without a separate inverter cabinet or DC wiring between them. MPPT accepts up to 5,500 W of PV at 120–450 V, output is pure sine wave at 100/110/220/230 VAC, and RS232, RS485 and CAN are provided for system integration. Castor wheels let a two-person crew position and service it without lifting gear.
No public price. Quotation is based on quantity, output configuration, customisation and delivery requirements.
Engineering response within 1 business day
Buyer decision points
This page is structured around technical review, procurement qualification and project conversion rather than retail pricing.
The inverter supports 100, 110, 220 and 230 VAC at 50 or 60 Hz. Confirm the exact combination for the destination market before production, because it is set at build.
The spec sheet states an operating range of -20 to 60 °C. That is the discharge range: LiFePO4 must not be charged below 0 °C, and the BMS blocks it to protect the cells. Confirm the charge window and, for cold markets, ask about the self-heating option before you specify.
Recommended · continuous maximum
MPPT accepts up to 5,500 W at 120–450 V with an 80 A limit. The recommended array is 2,000 W where average daily sunshine is six hours or more; size against the site's real insolation and load, not the maximum input.
Up to in parallel
Solar and mains charging share the same input stage. Confirm the priority logic, the AC charge current limit and the transfer behaviour against how the site will actually be operated.
Protection rating:
Humidity up to 95 % and altitude up to 4,000 m are stated, but no ingress protection rating is published for this model. Treat it as an indoor unit until an IP rating is confirmed in writing.
Confirm which pack-level, inverter-level and system-level certificates apply to the exact production configuration and target market before publishing or purchasing.
Technical data
| Nominal voltage | 51.2 V |
|---|---|
| Nominal capacity | 200 Ah |
| Nominal energy | 10.24 kWh |
| Cell configuration | 16S |
| Charging voltage | 58.4 V |
| Discharge cut-off | 44.8 – 46.5 V |
| Cycle test conditions | 25 °C, 0.5C / 0.5C, 80 % DOD, to 70 % capacity retention |
| Dimensions (W x D x H) | 620 × 440 × 240 mm |
|---|---|
| Weight | 79.5 kg |
| Communication | RS232, RS485, CAN |
| Charging temperature | 0 ~ 55 °C |
| Discharging temperature | -20 ~ 60 °C |
| Storage temperature | -10 ~ 35 °C, 50 % SOC recommended |
| Warranty | 5 years / 6,000 cycles, to 70 % capacity retention |
|---|---|
| MOQ | 10 units (sample from 1 unit) |
| Lead time | Samples 7-10 days, production 25-35 days after order confirmation |
| Export packing | Plywood case on pallet, UN38.3 documentation included |
| Container loading | Confirm per order — pallet configuration is project specific |
| HS code | 8507.60.00 |
Sent by email within one business day, with discharge curves and terminal drawings.
Application fit
Positioned for distributors, installers and OEM brands that want storage, PV charging and AC output in a single commissioned unit.
One enclosure replaces a separate battery, inverter and charge controller, which removes most of the DC wiring and commissioning time.
10.24 kWh of storage behind a 5 kW inverter covers a typical essential-circuit load through an evening outage.
Castor wheels and a single-box format suit installations that get relocated: site offices, events, clinics and rental fleets.
Branded enclosure, output voltage configuration, APP module and export documentation for regional brands.
OEM / ODM capability
Output voltage, frequency, branding and optional functions are set during build. Define them before sample production and lock them after approval.
Share target quantity, market, output voltage, PV array size and load profile.
Confirm battery configuration, inverter settings, communication and documents.
Review product label, packaging and functional requirements.
Assembly, functional testing, aging and final quality checks.
Prepare lithium battery shipping documents and agreed packaging.
Supplier verification
A B2B product page should help procurement teams verify who will build, test and support the system. Safecloud Energy Inc. was founded in 2007 and operates two plants in Henan and Anhui totalling 48,000 m², with eight automated production lines, 30+ aging machines and an in-house testing laboratory.
Verify cells, BMS, inverter boards, enclosure and purchased components against the approved configuration.
Review battery voltage and capacity, inverter output, protection functions and communication per the inspection plan.
Run configured systems through defined charge, discharge, PV input and AC output checks before release.
Check firmware, output voltage setting, label, accessories, manuals and carton marks.
Protective packaging with project-approved pallet arrangement suitable for the order and route.
Buyer questions
A complete system. It contains a 51.2 V 200 Ah LiFePO4 pack and a 5 kW hybrid inverter with an MPPT charge controller in one enclosure, so no separate inverter or DC cabling between units is required.
The inverter supports 100, 110, 220 and 230 VAC at 50 or 60 Hz. The exact configuration is set during production, so state the destination market on your enquiry.
Up to 5,500 W of PV within a 120–450 V window, with an 80 A MPPT limit. The recommended array is 2,000 W where average daily sunshine is six hours or more.
No ingress protection rating is published for this model, so treat it as an indoor unit. Humidity is rated to 95 % and altitude to 4,000 m, but neither of those substitutes for an IP rating against rain and dust. This model is rated .
No. APP monitoring is an option and must be selected before quotation so the communication hardware is fitted during build.
Quantity, target market, output voltage and frequency, PV array size, optional functions such as the APP module, logo or label files, documentation scope and target delivery time. For this model: 5 years / 6,000 cycles, to 70 % capacity retention.
Request for quotation
The model is attached automatically. Share the technical information needed for a useful quotation rather than only asking for a unit price.
The AYG10-5KW combines a 51.2 V 200 Ah LiFePO4 pack with a 5 kW hybrid inverter in one mobile enclosure, so a single unit covers storage, PV charging and AC output without a separate inverter cabinet or DC wiring between them. MPPT accepts up to 5,500 W of PV at 120–450 V, output is pure sine wave at 100/110/220/230 VAC, and RS232, RS485 and CAN are provided for system integration. Castor wheels let a two-person crew position and service it without lifting gear.
Send a short inquiry and an engineer will reply within one business day. For a detailed technical quotation, use the full RFQ form below.
Product: AYG10-5KW 48V 10.24kWh All-in-One Home Energy Storage System (AYG10-5KW)